Daewoo Kalos Скачать руководство пользователя страница 19

Страница: 19 / 270

SEATS AND OCCUPANT PROTECTION SYSTEMS 1–15

WARNING

• Do not adjust the driver’s seat

while the vehicle is moving.

Driver could lose control of the ve-
hicle and injury or property damage
could result.

FRONT SEATS

FRONT SEAT SLIDE ADJUSTMENT

To move the front seat forward or
backward:

1. Pull up and hold the lever located

under the front side of the front seat.

2. Slide the seat to the desired position.

3. Release the lever.

FRONT SEAT RECLINING ADJUSTMENT

To tilt seatback forward or backward,
turn the handwheel on the inside of the
seatback until the seatback is adjusted
to the desired position.

WARNING

• Do not adjust the driver’s seatback

while the vehicle is moving.

Driver could lose control of the ve-
hicle and injury or property damage
could result.

If the head restraint must be removed
for any reason,

1. Pull it up to the stop position.

2. While pushing the release button, lift

the head restraint from the guide
sleeve.

3. Replace head restraint and reset it in

intended position before driving.

WARNING

Make sure that the head restraint has
been put back into place and read-
justed before driving.

S3W1131A

S3W1141A

S3W1151A

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды

Daewoo Kalos, Руководство пользователя

Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды