Daewoo Kalos Скачать руководство пользователя страница 232

Страница: 232 / 270

6–30 SERVICE AND VEHICLE CARE

S3W6421A

TIRE CHAINS

Before fitting chains, remove wheel cov-
ers (if so equipped) to avoid scratching
them.

• Follow the chain manufacturer’s in-

structions.

• Secure the chains on the front tires

as tightly as possible.

• Re-tighten the chains after driving

about 0.5 mile (about 1.0km)

Chains are not recommended for the
rear tires.

CAUTION

Use of snow chains could adversely
affect vehicle handling.

• Do not exeed 50 km/h (30 mph) or

the chain manufacturer’s recom-
mended speed limit, whichever is
lower.

• Avoid sharp turns, bumps and

holes.

• Avoid locked-wheel braking.

WARNING

• Use the recommended wheels and

wheel lug nuts/bolts only.

Otherwise, you can lose control of
your vehicle and cause a collision
that can result in injuries or damage
to your vehicle or other property.

TIRE ROTATION

Front and rear tires perform different
jobs and can wear differently.

Normally, the front tires will wear faster
than rear tires. To prolong the life of
your tires and avoid uneven tread wear:

1. Rotate tires every 5,000 km

(3,000 miles).

2. Maintain proper tire pressure.

3. Check tightening of the lug nuts/

bolts.

See “HOW TO CHANGE A FLAT
TIRE” in the index.

WINTER TIRES

If you decide to use winter tires:

• Use them on all four wheels.

• Never exceed the maximum speed

specified by the tire manufacturer.

• Always use the tire pressure specified

by the tire manufacturer.

Front

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды

Daewoo Kalos, Руководство пользователя

Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды