Daewoo Kalos Скачать руководство пользователя страница 168

Страница: 168 / 270

4–60 CLIMATE CONTROL AND AUDIO SYSTEM

button to release the control

panel.

2. Long press: Button, to switch the

unit on/off,

Short press: To mute the unit’s vol-
ume.

3. Volume control.

4. CD compartment.

5. Arrow buttons.

6. Long press:

– CD eject.

Short press:

SRC

button, to select

the CD, radio, CD changer or Com-
pact Drive MP3 (if connected) and
AUX sources.

7. Short press:

MENU

button to open

the basic settings menu.

Long press: to start the scan func-
tion.

X-BASS

button, to adijust the

X-Bass function.

9. AUDIO button, to adjust the bass,

treble, balance and fader settings.

10. Keys 1 - 6.

11. Short press: TRAF button to switch

traffic information standby on/off.

Long press: RDS button, to switch
the RDS feature on/off.

12. Short press: BND button, to select

the FM memory banks and MW/
LW wavebands (MW and LW not
on the Kiel CD32), and to select
radio mode as the source.

Long press: TS, to start the
Travelstore function.

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Daewoo Kalos, Руководство пользователя, Страница: 168 / 270

Результаты поиска

Содержание Kalos

Отзывы: