Daewoo Kalos Скачать руководство пользователя страница 53

Страница: 53 / 270

INSTRUMENTS AND CONTROLS 2–19

S3W2311A

WINDSHIELD WASHER

CAUTION

• Less than clear vision for the driver

can lead to an accident resulting in
personal injury and damage to
your vehicle or other property.

• Do not spray washer fluid on the

windshield in freezing weather.

• Warm the windshield before you

operate the windshield washer.

Washer fluid can form ice on a fro-
zen windshield and obstruct your vi-
sion.

To operate the windshield wipers, turn
the ignition ON and move the wind-
shield wiper / washer lever upward.

The windshield wipers operate in the
following four positions:

•

OFF

: System off. Default position.

•

INT

: Intermittent operation. Lever up

one level

•

: Continuous wipe, slow speed.

Lever up two levels.

•

: Continuous wipe, fast speed. Le-

ver up three levels.

Misting function

To operate the windshield wipers once
in case of light rain or mist, lightly
move the windshield wiper / washer le-
ver toward the INT position and release
it.

The lever will return automatically to
its normal position when released.

The wipers will operate through one
cycle.

NOTE

Wiper blade will wear out and not
wipe properly reducing forward vi-
sion.

•

Replace worn wiper blades.

S3W2321A

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Daewoo Kalos, Руководство пользователя, Страница: 53 / 270

Результаты поиска

Содержание Kalos

Отзывы: