Daewoo Kalos Скачать руководство пользователя страница 226

Страница: 226 / 270

6–24 SERVICE AND VEHICLE CARE

WARNING

Battery acid can cause severe burns,
explode, and damage paint.

• Avoid skin and clothing contact

with battery acid.

• Keep flames, sparks and smoking

materials away from battery.

BATTERY

Your vehicle is equipped with a main-
tenance-free battery.

CLEANING THE BATTERY TERMINALS

1. Turn the ignition OFF and remove

the key from the ignition key slot.

2. Use a wrench to loosen and remove

the battery cable clamps from the ter-
minals. Always disconnect the nega-
tive (-) terminal first.

3. Use a wire brush or a terminal clean-

ing tool to clean the terminals.

4. Check the battery terminals for white

or bluish powder, which are signs of
corrosion.

5. Remove any corrosion with a solu-

tion of baking soda and water. The
baking soda-and-water solution will
bubble and turn brown.

6. When the bubbling stops, wash the

solution off with plain water and dry
the battery with a cloth or paper
towel.

7. Reconnect and tighten the positive (+)

terminal, then the negative (-) termi-
nal. Always reconnect the negative
terminal (-) last.

MAINTENANCE SHCHEDULE

See “SCHEDULED MAINTENANCE
SERVICES” in the service guide.

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Daewoo Kalos, Руководство пользователя, Страница: 226 / 270

Результаты поиска

Содержание Kalos

Отзывы: