Daewoo Kalos Скачать руководство пользователя страница 195

Страница: 195 / 270

EMERGENCIES 5–5

S3W5024A

12. Replace and lightly seat the wheel

nuts or bolts by turning clockwise.

13. Turn jack handle counterclockwise

and lower vehicle to the ground.

14. Tighten wheel nuts or bolts firmly

to 88 lb-ft (120 Nm) in a “X” pat-
tern; 1

→

4 (See fig.

below)

CAUTION

When using the jack, the vehicle
could become unstable and move,
damaging the vehicle and causing
personal injury.

• Use jack supplied at correct jack-

ing position.

• When installing the jack for lifting

the vehicle, it should be perpen-
dicular to the ground.

• Do not go under a jacked-up ve-

hicle.

• Do not start vehicle while jacked-

up.

• Before jacking, get all passengers

out of the vehicle and clear of ve-
hicle and other traffic.

• Use jack only for changing wheels.
• Do not jack vehicle on an inclined

or slippery surface.

• Use jacking position nearest to the

wheel requiring changing.

• Block wheel diagonally opposite

the wheel to be changed.

(Continued)

15. Install wheel cover if required.

WARNING

Make sure to use the proper nuts or
bolts tightened to the proper torque.

Using incorrect parts or improperly
tightened wheel nuts or bolts can
cause or come off the vehicle.

Tighten

CAUTION

Have the flat tire fixed or replaced
by your authorized repairer for fu-
ture use as soon as possible.

WARNING

Do not store the jack and tools in the
passenger compartment.

In a sudden stop or collision, loose
equipment can be thrown around the
vehicle and cause personal injuries.

16. Secure the jack, tools, and the flat

tire in their proper locations.

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды

Daewoo Kalos, Руководство пользователя

Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды