Daewoo Kalos Скачать руководство пользователя страница 198

Страница: 198 / 270

5–8 EMERGENCIES

WARNING

• Never let passengers ride in a ve-

hicle that is being towed.

• Never tow a vehicle faster than

safe or posted speeds.

• Never tow a vehicle with dam-

aged parts that are not fully se-
cured on the vehicle.

Failure to observe these precautions
can result in personal injury.

TOWING THE VEHICLE

If it is necessary to tow your vehicle,
contact a authorized repairer or a pro-
fessional tow truck service.

Once the previously discharged vehicle
is running:

1. Carefully disconnect the ground con-

nection (-). Begin with the vehicle
with the discharged battery. Leave the
discharged vehicle running.

2. Disconnect the negative lead from ve-

hicle providing the jump.

3. Disconnect the “+” lead from both

batteries. Store the jumper cables
with the spare tire.

4. Operate the discharged vehicle for

approximately 20 minutes. This will
allow the charging system to re-
charge your battery.

5. If this discharge condition recurs,

consult your authorized repairer.

NOTE

Attempts to start the engine of the ve-
hicle with the discharged battery
should be made at intervals of about
one minute and should not last longer
than 15 seconds each.

4. Make the last connection to a suit-

able ground, such as a steel bracket
bolted to the engine block.

5. The engine of the vehicle providing

the jump start can be allowed to run
during the jump start.

S3W5041A

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды

Daewoo Kalos, Руководство пользователя

Результаты поиска

Содержание Kalos

Отзывы:

Похожие инструкции для Kalos

Бренды по названию

Популярные бренды