Daewoo Kalos Скачать руководство пользователя страница 134

Страница: 134 / 270

4–26 CLIMATE CONTROL AND AUDIO SYSTEM

Switching over the tape playing side

Simultaneously press buttons

(6)

and

(7).

The tape playing direction changes. The
direction of play is automatically
switched over when the end of the tape
is reached (autoreverse).

Fast tape winding

Fast-Forwarding

To start fast-forwarding,

press the

button (7) until it clicks

into position.

"FORWARD" appears in the display.

Fast-Rewinding

To start fast-rewinding,

press the

button (6) until it clicks

into position.

"REWIND" appears in the display.

Stopping tape winding

press the fast tape-winding button for
the opposite direction.

Playback is resumed.

Switching radiomonitor ON/OFF

Whilst the tape is fast winding, you can
listen to the radio station that was tuned
into last. To use this feature,
"radiomonitor" must be activated.

Press the

MENU

button (12).

Keep pressing the

button (9)

until "RM ON" or "RM OFF“ ap-
pears in the display.

Press the

button (9) to

switch the radiomonitor on/off.

When you have finished making your
changes,

Press the

MENU

button (12).

NOTE

You can only change the settings for
the radiomonitor if cassette mode is
active.

CASSETTE MODE (LOGIC DECK)

Cassette playback

If there is no cassette inserted in the unit
yet,

insert a cassette with its open edge
on the right into the cassette com-
partment (5).

The side of the cassette that is upper-
most is then played first of all.

If a cassette is already inserted in the
unit,

keep pressing the

SRC

button (8) until

"CASSETTE" appears in the display.

The cassette is played in the direction
that was set last.

Cassette eject

Press the

button (4).

The cassette is ejected.

Remove the cassette.

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Daewoo Kalos, Руководство пользователя, Страница: 134 / 270

Результаты поиска

Содержание Kalos

Отзывы: