Daewoo Kalos Скачать руководство пользователя страница 67

Страница: 67 / 270

INSTRUMENTS AND CONTROLS 2–33

S3W2515A

TAILGATE (Hatchback models)

To unlock the tailgate, insert the key
and turn it counterclockwise.

To lock the tailgate using the key, turn
the key clockwise.

The tailgate can also be locked or un-
locked by central door locking system*.
See “Central Door Locking System” in
the index.

UNLOCK LOCK

To open the tailgate, pull up the handle
above the license plate and lift the tail-
gate.

To close the tailgate, push it down
firmly so it latches securely.

S3W2516A

WARNING

Driving vehicle with tailgate open
can allow exhaust gases to enter pas-
senger compartment.

• Do not drive with tailgate open.

If you must drive this way, close
windows, place in ‘FRESH AIR
MODE’, and run blower at high
speed. (See “VENTILATION” in
the index)

Exhaust gases are usually toxic and
can cause injury or death.

CAUTION

Be sure the tailgate not to hit ob-
structions, such as a standing person
or wall, when you open the tailgate.

Содержание Kalos















































































































































































































































































Результаты поиска

Содержание Kalos

Отзывы:

Daewoo Kalos, Руководство пользователя, Страница: 67 / 270

Результаты поиска

Содержание Kalos

Отзывы: