Daewoo DAPD17REQ-EC, Руководство пользователя

Страница: 21 / 50

21
Fault judge and eliminate Fault Number
1. Water thermometer or sensor plug not work.
Remove method: check and replace.
2. Water shortage (add water).
3. Engine load if too much.
4. Check around to see whether it is ventilate or not.
The temperature of
cooling water is too
high.
1. Starter do not run.
2. The starter idling starting weak.
3. Its hard for the gear to return.
Prevention method
:
Check the lines of the battery voltage and make sure
whether it been changed.
Starter fault. 10
1
.
2
.
Pressure regulating valve can not work normally.
Prevention method
：
Adjust the screw of the valve.
3
.
Ignition time too early, adjust ignition timing.
4
.
The spark plug can not work normally.
5
.
High-tension line can not work normally.
6
.
High pressure can not work normally.
Project 4
,
5
,
6 handling method: replace the related accessories.
smoke.
11
1
.
Check the engine oil, whether it too much, pour out excess oil.
2
.
Replace or clean the packing ring.
3
.
Overhaul or replace piston and cylinder block.
smoke.
12
1
.
Engine preheating is not enough.
2
.
Water in the cylinder, overhaul the engine cylinder.
smoke
13
1
.
2. Exhaust valve is not totally sealing, polish the valve.
3. Ignite too late, adjust the ignition timing.
and explosive sound.
14
1. Gas pipe jammed; (check and clean the pipe).
3. Improper valve clearance; (repair and adjust.
Load speed drops too
much. 15
9