Cooktop Maintenance
62
English
Assembling the Burner Heads and Caps, cont.
SimmerSear Burner Assembly
Burner head
1. With power off and all surfaces cool, place the
burner head so the locating tab goes into the
Locating
tab
keyed hole.
Keyed hole
Burner base
2.
Put the burner rings on the burner heads. Match
the tabs on the ring bottom to the slots on the
head. Twist each ring back and forth slightly until
it drops into place.
3.
Put the burner caps on the burner rings. The
ridge around the bottom edge of the cap fits
around the top of the ring.
NOTE
After assembling the burners, test for proper function. Improper assembled parts will cause poor
ignition or uneven flames (see below). If the flame and excessively yellow, shut off the burner
immediately and let it cool. Adjust the burner caps, and relight the burner. A good flame is blue
and even all around the burner.
Burner
ring
Tabs Slots
Ridge on
bottom of
burner cap