xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
137
DGS-3450:admin# show packet ports 2:7
Command: show packet ports 2:7
Port number : 2:7
Frame Size/Type Frame Counts Frames/sec
--------------- ---------------------- -----------
64 0 0
65-127 0 0
128-255 0 0
256-511 0 0
512-1023 0 0
1024-1518 0 0
1519-1522 0 0
1519-2047 0 0
2048-4095 0 0
4096-9216 0 0
Unicast RX 0 0
Multicast RX 0 0
Broadcast RX 0 0
Frame Type Total Total/sec
--------------- ---------------------- -----------
RX Bytes 0 0
RX Frames 0 0
TX Bytes 0 0
TX Frames 0 0
show error ports
Purpose
Use to show error statistics information for a range of ports.
Syntax
show error ports <portlist>
Description
The show error ports command shows error statistics for a range of ports.
Parameters
portlist
- Specifies a range of ports to be displayed. (Unit ID: port number).
Restrictions
None.
Example usage:
To display the errors of the port 3 of unit 1:
DGS-3450:admin# show error ports 1:3
Command: show error ports 1:3
Port number : 1:3
RX Frames TX Frames
------------------------------------------ ---------------------------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
Buffer Full Drop 0
ACL Drop 0
Multicast Drop 0
VLAN Ingress Drop 0
