D-Link xStack DGS-3400 Series, Справочное руководство

Страница: 27 / 629

xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
23
Command Parameters
enable 802.1x
disable 802.1x
create 802.1x user < username 15 >
delete 802.1x user < username 15 >
show 802.1x user
config 802.1x auth_protocol [ local | radius_eap ]
config 802.1x fwd_pdu system [ enable | disable ]
config 802.1x fwd_pdu ports [ < portlilst > | all ] [ enable | disable ]
config 802.1x authorization network
radius [ enable | disable ]
show 802.1x { [ auth_state | auth_configuration ] ports { < portlist > } }
config 802.1x capability ports [ < portlist > | all ] [ authenticator | none ]
config 802.1x max_users [<value 1 – 4000> | no_limit]
config 802.1x auth_parameter ports [<portlist> | all] [default | {direction [both | in] | port_control [force_unauth | auto |
force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535> |
supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> | max_req <value
1-10> | reauth_period <sec 1-65535> | max_users [<value 1-128> | no_limit] |
enable_reauth [enable|disable]}(1)]
config 802.1x auth_mode [ port_based | mac_based ]
config 802.1x init [ port_based ports [ < portlist | all > ] | mac_based ports [ < portlist > | all ] {
mac_address < macaddr > }]
config 802.1x reauth [ port_based ports [ < portlist | all >]| mac_based ports [ < portlist > | all ] {
mac_address < macaddr > }]
create 802.1x guest_vlan { < vlan_name 32 > }
delete 802.1x guest_vlan { < vlan_name 32 > }
config 802.1x guest_vlan ports [ < portlist > | all ] state [ enable | disable ]
show 802.1x guest_vlan
config radius add <server_index 1-3> [<server_ip> | <ipv6addr>] [key <password 32> |
encryption_key <password 56>] [default | {auth_port <udp_port_number 1-
65535 > | acct_port <udp_port_number 1-65535 > | timeout <sec 1-255> |
retransmit<int 1-20>}]
config radius delete < server_index 1-3 >
config radius <server_index 1-3> { ipaddress [ <server_ip> | <ipv6addr> ] | key <passwd 32> |
auth_port [<udp_port_number>| default ] | acct_port [ <udp_port_number> |
default ] | timeout [ <int 1-255> | default ] | retransmit [ <int 1-20> | default ]} (1)
<server_index 1-3> {ipaddress [<server_ip> | <ipv6addr> ] | [ key <password
32> | encryption_key < password 56 >] | auth_port [<udp_port_number 1-
65535> | default] | acct_port [<udp_port_number 1-65535 > | default] | timeout
[<sec 1-255> | default] | retransmit [<int 1-20> | default]}
show radius
show auth_statistics {ports [<portlist> | all]}
show auth_diagnostics {ports [<portlist> | all]}
show auth_session_statistics {ports [<portlist> | all]}