xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
189
25
DHCP
V
6
S
ERVER
C
OMMANDS
The DHCPv6 Server commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command
Parameters
create dhcpv6 pool
<pool_name 12>
delete dhcpv6 pool
[<pool_name 12> | all]
show dhcpv6 pool
{<pool_name 12>}
config dhcpv6 pool ipv6network_addr
<pool_name 12> begin < ipv6networkaddr> end <ipv6networkaddr>
config dhcpv6 pool domain_name
<pool_name 12> <domain_name 255>
config dhcpv6 pool dns_server
<pool_name 12> <ipv6addr> {<ipv6addr>}
config dhcpv6 pool lifetime
<pool_name 12> preferred_lifetime <sec 60-4294967295> valid_lifetime <sec
60-4294967295>
config dhcpv6 pool manual_binding
<pool_name 12> [add [<ipv6addr> | <ipv6networkaddr>]client_duid <string 28> |
delete [<ipv6addr>|<ipv6networkaddr> | all]]
show dhcpv6 manual_binding
{<pool_name 12>}
show dhcpv6 binding
{<pool_name 12>}
clear dhcpv6 binding
{<pool_name 12>}
enable dhcpv6_server
disable dhcpv6_server
show dhcpv6_server
{ipif <ipif_name 12>}
config dhcpv6 pool excluded_address
<pool_name 12> [ add begin < ipv6addr> end < ipv6addr > | delete [ begin <
ipv6addr> end < ipv6addr> | all]]
show dhcpv6 excluded_address
{<pool_name 12>}
config dhcpv6_server ipif
<ipif_name 12> state [enable | disable]
debug dhcpv6_server state
[enable | disable]
debug dhcpv6_server packet
{all | receiving | sending} state [enable | disable]
config dhcpv6 pool prefix_delegation
<pool_name 12> <ipv6networkaddr> <value 1-128> <ipif_name 12>
Each command is listed, in detail, in the following sections.
create dhcpv6 pool
Purpose
This command is used to create a DHCPv6 pool.
Syntax
create dhcpv6 pool <pool_name 12>
Description
This command is used to create a DHCPv6 pool for the DHCPv6 server.
Parameters
<pool_name 12>
- Enter a name of up to 12 alphanumeric characters to identify the pool to
be created with this command.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage: