xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
198
config dhcpv6 pool excluded_address
all
- Delete all excluded address ranges of a specified pool.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To add the IPv6 addresses range that DHCPv6 server should not assign to clients:
DGS-3450:admin# config dhcpv6 pool excluded_address pool1 add begin 2000::3 end 2000::8
Command: config dhcpv6 pool excluded_address pool1 add begin 2000::3 end 2000::8
Success.
DGS-3450:admin#
show dhcpv6 excluded_address
Purpose
This command is used to display the groups of IPv6 addresses which are excluded from the
legal assigned IPv6 address
Syntax
show dhcpv6 excluded_address {<pool_name 12>}
Description
This command will display the groups of IPv6 addresses which are excluded from the legal
assigned IPv6 address.
Parameters
<pool_name 12>
- Enter the name of the DHCPv6 pool for which to display the excluded
address information.
If not specify the pool name, It will display all pool’s excluded address information.
Restrictions
None.
Example usage:
To display the excluded address information:
