DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 480
DGS-3700-12:5#show wac auth_state ports
Command: show wac auth_state ports
P:Port-Based Pri:Priority
Port MAC Address Original State VID Pri Aging Time/ Idle
RX VID Block Time Time
----- ------------------ --------- -------------- ---- --- ------------ ----
9 00-05-5D-F9-16-76 1 Authenticated 2 - 1440 -
Total Authenticating Hosts : 0
Total Authenticated Hosts : 1
Total Blocked Hosts : 0
DGS-3700-12:5#
clear wac auth_state
Purpose
To clear the WAC authentication state of a port.
Syntax
clear wac auth_state [ ports [<portlist> | all ] {authenticated | authenticating |
blocked} | macaddr <macaddr> } ]
Description
This command is used to clear the authentication state of a port. The port will return to
un-authenticated state. All the timer associated with the port will be reset.
Parameters
ports
- Specify the list of ports whose WAC state will be cleared.
<portlist>
- Specify a range of ports.
all
- Specify to clear all ports.
authenticated
- Specify to clear all authenticated users for a port.
authenticating
- Specify to clear all authenticating users for a port.
blocked
- Specify to clear all blocked users for a port.
macaddr
- Specify to clear a specific user.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To clear the WAC authentication state of ports 1 to 5:
DGS-3700-12:5#clear wac auth_state ports 1-5
Command: clear wac auth_state ports 1-5
Success.
DGS-3700-12:5#
