DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 108
DGS-3700-12:5#show lldp mgt_addr
Command: show lldp mgt_addr
Address 1 :
------------------------------------------------------
Subtype : IPv4
Address : 10.19.72.38
IF Type : IfIndex
OID : 1.3.6.1.4.1.171.10.102.1.2
Advertising Ports :
Total Entries : 1
DGS-3700-12:5#
show lldp remote_ports
Purpose
To display the information learned from neighbors.
Syntax
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Description
Use this command to display the information learned from the neighbor parameters.
Parameters
<portlist>
- Specify the ports to be displayed. When a port list is not specified,
information for all ports will be displayed.
mode
- See below:
brief
- Specify to display the information in brief mode.
normal
- Specify to display the information in normal mode. This is the default
display mode.
detailed
- Specify to display the information in detailed mode.
Restrictions
None.
Example usage:
To display LLDP information for remote ports 1 and 2:
DGS-3700-12:5#show lldp remote_ports 1-2
Command: show lldp remote_ports 1-2
Remote Entities Count : 0
DGS-3700-12:5#
show lldp statistics
Purpose
To display the system LLDP statistics information.
Syntax
show lldp statistics
Description
Use this command to display an overview of neighbor detection activity on the switch.
Parameters
None.
Restrictions
None.
Example usage:
To display LLDP statistics:
