D-Link DGS-3700 Series, Справочное руководство

Страница: 415 / 557

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 415
DGS-3700-12:5#config authen application http login default
Command: config authen application http login default
Success.
DGS-3700-12:5#
show authen application
Purpose Used to display authentication methods for the various applications on the Switch.
Syntax show authen application
Description This command will display all of the authentication method lists (login, enable
administrator privileges) for Switch configuration applications (console, telnet,
SSH, web) currently configured on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display the login and enable method list for all applications on the Switch:
DGS-3700-12:5#show authen application
Command: show authen application
Application Login Method List Enable Method List
-------------- ---------------- -----------------------
Console default default
Telnet Trinity default
SSH default default
HTTP default default
DGS-3700-12:5#
create authen server_host
Purpose Used to create an authentication server host.
Syntax create authen server_host <ipaddr> protocol [tacacs | xtacacs | | radius]
{port <int 1-65535> | key [<key_string 254> | none] | timeout <int 1-255> |
retransmit < 1-20>}
Description This command will create an authentication server host for the
TACACS/XTACACS//RADIUS security protocols on the Switch. When
a user attempts to access the Switch with authentication protocol enabled, the
Switch will send authentication packets to a remote
TACACS/XTACACS//RADIUS server host on a remote host. The
TACACS/XTACACS//RADIUS server host will then verify or deny the
request and return the appropriate message to the Switch. More than one
authentication protocol can be run on the same physical server host but, remember
that TACACS/XTACACS//RADIUS are separate entities and are not
compatible with each other. The maximum supported number of server hosts is 16.
Parameters
server_host <ipaddr>
−
The IP address of the remote server host to add.
protocol – The protocol used by the server host. The user may choose one of the
following:
tacacs – Enter this parameter if the server host utilizes the TACACS protocol.
xtacacs
−
Enter this parameter if the server host utilizes the XTACACS protocol.
−
Enter this parameter if the server host utilizes the protocol.