D-Link DGS-3700 Series, Справочное руководство

Страница: 271 / 557

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 271
To configure traffic control and enable broadcast storm control for ports 1-12:
DGS-3700-12:5#config traffic control 1-12 broadcast enable action shutdown threshold 1
countdown 10 time_interval 10
Command: config traffic control 1-12 broadcast enable action shutdown threshold 1
countdown 10 time_interval 10
Success.
DGS-3700-12:5#
show traffic control
Purpose Used to display current traffic control settings.
Syntax show traffic control { <portlist> }
Description
This command displays the current storm traffic control configuration on the Switch.
Parameters
<portlist>
−
Used to specify port or list of ports for which to display traffic control
settings. The beginning and end of the port list range are separated by a dash.
Restrictions
None.
Example usage:
To display traffic control settings:
DGS-3700-12:5#show traffic control
Command: show traffic control
Traffic Control Trap : [None]
Traffic Control Log : Enabled
Traffic Control Auto Recover Time : 0 Minutes
Port Thres Broadcast Multicast Unicast Action Count Time Shutdown
hold Storm Storm Storm Down Interval Forever
---- ----- --------- --------- -------- -------- ----- -------- --------
1 131072 Disabled Disabled Disabled drop 0 5
2 131072 Disabled Disabled Disabled drop 0 5
3 131072 Disabled Disabled Disabled drop 0 5
4 131072 Disabled Disabled Disabled drop 0 5
5 131072 Disabled Disabled Disabled drop 0 5
6 131072 Disabled Disabled Disabled drop 0 5
7 131072 Disabled Disabled Disabled drop 0 5
8 131072 Disabled Disabled Disabled drop 0 5
9 131072 Disabled Disabled Disabled drop 0 5
10 131072 Disabled Disabled Disabled drop 0 5
11 131072 Disabled Disabled Disabled drop 0 5
12 131072 Disabled Disabled Disabled drop 0 5
DGS-3700-12:5#
config traffic trap
Purpose Used to configure the trap settings for the packet storm control mechanism.
Syntax config traffic trap [none | storm_occurred | storm_cleared | both]
Description This command will configure how packet storm control trap messages will be used
when a packet storm is detected by the Switch. This function can only be used for
the software traffic storm control mechanism (when the
action field in the config
traffic storm_control command is set as shutdown ).