DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 347
config scheduling
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the traffic scheduling mechanism for each queue:
DGS-3700-12G:5#config scheduling ports 10 3 strict
Command: config scheduling ports 10 3 strict
Success.
DGS-3700-12G:5#
config scheduling_mechanism
Purpose
Used to configure the traffic scheduling mechanism for each port.
Syntax
config scheduling_mechanism {ports [<portlist> | all ]}
[strict | wrr]
Description
This command is used to specify how the switch handles packets in priority queues.
Parameters
<portlist>
– Select the port of list of ports you wish to configure.
all
– Choose this option to select all ports.
strict
−
The highest queue first process.That is,the highest queue should be finished at
first.
wrr
−
Using weighted round-robin algorithm to handle packets in priority queues.
Restrictions
Only Administrator and Operation-level users can issue this command.
Example usage:
To configure the traffic scheduling mechanism for port1:
DGS-3700-12G:5#config scheduling_mechanism ports 1 strict
Command: config scheduling_mechanism ports 1 strict
Success.
DGS-3700-12G:5#
show scheduling
Purpose
Used to display the currently configured traffic scheduling on the Switch.
Syntax
show scheduling {<portlist>}
Description
This command is used to display the current traffic scheduling parameters in use on
the Switch.
Parameters
<portlist>
– Specifies a range of ports to be displayed.
Restrictions
None.
Example usage:
To display the current scheduling configuration:
