D-Link DGS-3700 Series Скачать руководство пользователя страница 130

Страница: 130 / 557

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide

Page | 130

DGS-3700-12:5#enable sflow

Command: enable sflow

Success.

DGS-3700-12:5#

disable sflow

Purpose

Used to disable the sFlow function.

Syntax

disable sflow

Description

This command is used to disable the sFlow function.

Parameters

None.

Restrictions

Only Administrator and Operator-level users can issue this command.

Example usage:

To disable sflow:

DGS-3700-12:5#disable sflow

Command: disable sflow

Success.

DGS-3700-12:5#

show sflow

Purpose

Used to display the sFlow function.

Syntax

show sflow

Description

This command is used to display the sFlow function settings on the Swicth.

Parameters

None.

Restrictions

None.

Example usage:

To display sflow:

DGS-3700-12:5#show sflow

Command: show sflow

sFlow Version : 1.00

sFlow Address : 10.24.73.21

sFlow State : Disabled

DGS-3700-12:5#

create sflow flow_sampler ports

Purpose

Used to create the sflow flow_sampler.

Syntax

create sflow flow_sampler ports [<portlist> | all] analyzer_server_id <value 1-4>

{rate <value 0-65535> | maxheadersize <value 18-256>}

Description

This command is used to create the sFlow flow_sampler. By configuring the sampling

function for a port, a sample packet received by this port will be encapsulated and
forwarded to the analyzer server at the specified interval.

Parameters

ports

– Specifies the list of ports to be configured.

analyzer_server_id

– The analyzer_server_id specifies the ID of a server analyzer

Содержание DGS-3700 Series














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3700 Series

Отзывы:

D-Link DGS-3700 Series, Справочное руководство, Страница: 130 / 557

Результаты поиска

Содержание DGS-3700 Series

Отзывы: