DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 167
disable sntp
Description
This command will disable SNTP support. SNTP service must be separately
configured (see
config sntp
).
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable SNTP support:
DGS-3700-12:5#disable sntp
Command: disable sntp
Success.
DGS-3700-12:5#
config time
Purpose
Used to manually configure system time and date settings.
Syntax
config time <date ddmthyyyy > <time hh:mm:ss>
Description
This command will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
Parameters
date
– Express the date using two numerical characters for the day of the month, three
alphabetical characters for the name of the month, and four numerical characters
for the year. For example: 03aug2003.
time
– Express the system time using the format hh:mm:ss, that is, two numerical
characters each for the hour using a 24-hour clock, the minute and second. For
example: 19:42:30.
Restrictions
Only Administrator and Operator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP support is
enabled.
Example usage:
To manually set system time and date settings:
DGS-3700-12:5#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3700-12:5#
config time_zone
Purpose
Used to determine the time zone used in order to adjust the system clock.
Syntax
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
Description
This command will adjust system clock settings according to the time zone. Time
zone settings will adjust SNTP information accordingly.
Parameters
operator
– Choose to add (+) or subtract (-) time to adjust for time zone relative to
GMT.
hour
– Select the number of hours different from GMT.
min
– Select the number of minutes difference added or subtracted to adjust the time
zone.
