D-Link DFL-1600 - Security Appliance, Руководство пользователя

Страница: 45 / 552

To move the example my_script.sgs to non-volatile memory the command would be:
gw-world:/> script -store -name=my_script.sgs
Alternatively, all scripts can be moved to non-volatile memory with the command:
gw-world:/> script -store -all
Removing Scripts
To remove a saved script. the script -remove command can be used.
To remove the example my_script.sgs script file, the command would be:
gw-world:/> script -remove -name=my_script.sgs
Listing Scripts
The script on its own, command without any parameters, lists all the scripts currently available and
indicates the size of each script as well as the type of memory where it resides (residence in
non-volatile memory is indicated by the word "Disk" in the Memory column).
gw-world:/> script
Name Storage Size (bytes)
-------------- ------------ --------------
my_script.sgs RAM 8
my_script2.sgs Disk 10
To list the content of a specific uploaded script file, for example my_script.sgs the command would
be:
gw-world:/> script -show -name=my_script.sgs
Creating Scripts Automatically
When the same configuration objects needs to be copied between multiple NetDefend Firewalls,
then one way to do this with the CLI is to create a script file that creates the required objects and
then upload to and run the same script on each device.
If we already have a NetDefendOS installation that already has the objects configured that need to
be copied, then running the script -create command on that installation provides a way to
automatically create the required script file. This script file can then be downloaded to the local
management workstation and then uploaded to and executed on other NetDefend Firewalls to
duplicate the objects.
For example, suppose the requirement is to create the same set of IP4Address objects on several
NetDefend Firewalls that already exist on a single unit. The administrator would connect to the
single unit with the CLI and issue the command:
gw-world:/> script -create Address IP4Address -name new_script.sgs
This creates a script file called new_script_sgs which contains all the CLI commands necessary to
create all IP4Address address objects in that unit's configuration. The created file's contents might,
for example, be:
2.1.5. CLI Scripts Chapter 2. Management and Maintenance
45