D-Link DFL-1600 - Security Appliance Скачать руководство пользователя страница 369 | Manualshive

Страница: 369 / 552

D-Link DFL-1600 - Security Appliance Скачать руководство пользователя страница 369

•

Domain Name

The Domain Name is used when formatting usernames. This is the first part of the full domain
name. In our examples above, the Domain Name is myldapserver. The full domain name is a dot
separated set of labels, for example, myldapserver.local.eu.com.

This option is only available if the Server Type is NOT set to Other.

This option can be left empty but is required if the LDAP server requires the domain name when
performing a bind request.

Optional Settings

There is one optional setting:

•

Password Attribute

The password attribute specifies the ID of the tuple on the LDAP server that contains the user's
password. The default ID is userPassword.

This option should be left empty unless the LDAP server is being used to authenticate users
connecting via PPP with CHAP, MS-CHAPv1 or MS-CHAPv2.

When it is used, it determines the ID of the data field in the LDAP server database which
contains the user password in plain text. The LDAP server administrator must make sure that
this field actually does contain the password. This is explained in greater detail later.

Bind Request Authentication

LDAP server authentication is automatically configured to work using LDAP Bind Request
Authentication. This means that authentication succeeds if successful connection is made to the
LDAP server. Individual clients are not distinguished from one another.

LDAP server referrals should not occur with bind request authentication but if they do, the server
sending the referral will be regarded as not having responded.

LDAP Server Responses

When an LDAP server is queried by NetDefendOS with a user authentication request, the following
are the possible outcomes:

•

The server replies with a positive response and the user is authenticated.

Clients using PPP with CHAP, MS-CHAPv1 or MS-CHAPv2 is a special case and
authentication is actually done by NetDefendOS, as discussed later.

•

The server replies with a negative response and the user is not authenticated.

•

The server does not respond within the Timeout period specified for the server. If only one
server is specified then authentication will be considered to have failed. If there are alternate
servers defined for the user authentication rule then these are queried next.

Usernames may need the Domain

With certain LDAP servers, the domain name may need to be combined with the username when the
user is prompted for a username/password combination.

8.2.4. External LDAP Servers

Chapter 8. User Authentication

369

«
...
367
368
369
370
371
...
»

Содержание DFL-1600 - Security Appliance









































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды