DES-3000 Series Layer 2 Switch CLI Reference Manual
30
C
OMMAND
H
ISTORY
L
IST
The command history list commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
? {<command>}
show command_history
dir
config command_history
<value 1-40>
Each command is listed, in detail, in the following sections.
?
Purpose
Used to display all commands in the Command Line Interface (CLI).
Syntax
? {<command>}
Description
This command will display all of the commands available through the
Command Line Interface (CLI).
Parameters
<command>
- Entering the question mark with an appropriate command
will list all the corresponding parameters for the specified command, along
with a brief description of the commands function and similar commands
having the same words in the command.
Restrictions None.
Example usage
To display all of the commands in the CLI:
DES-3026:4#?
Command: ?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config address_binding ip_mac ipaddress
config 802.1x guest_vlan ports
config 802.1x reauth
config account
config address_binding ip_mac ports
config arp_aging time
config bandwidth_control
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
Example usage:
180
