DES-3000 Series Layer 2 Switch CLI Reference Manual
•
The maximum attempts for delivering mail to recipients is three. Mail message delivery attempts will be tried every five
minutes until the maximum number of attempts is reached. Once reached and the message has not been successfully
delivered, the message will be dropped and not received by the mail recipient.
•
If the Switch shuts down or reboots, mail messages in the waiting queue will be lost.
The SMTP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command Parameters
enable smtp
disable smtp
config smtp
{server <ipaddr> | server_port <tcp_port_number 1-65535> |
self_mail_addr <mail_addr 64> | [add mail_receiver <mail_addr
64> | delete mail_receiver <index 1-8>]}
show smtp
smtp send_testmsg
Each command is listed, in detail, in the following sections.
enable smtp
Purpose
Used to enable the Switch as a SMTP client.
Syntax
enable smtp
Description
This command, in conjunction with the
disable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable SMTP on the Switch.
DES-3026:4#enable smtp
Command: enable smtp
Success.
DES-3026:4#
disable smtp
Purpose
Used to disable the Switch as a SMTP client.
Syntax
disable smtp
Description
This command, in conjunction with the
enable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable SMTP on the Switch.
46
