manualshive.com logo in svg

Cypress EX-USB FX3, Руководство программиста

Программатор Cypress EX-USB FX3 - надежное устройство для работы с USB-интерфейсом. Загрузите бесплатное Руководство программиста для получения сведений об использовании и настройке устройства. Скачайте его с {веб-сайта} и начните использовать ваш Cypress EX-USB FX3 с максимальной эффективностью.

Поделиться
Скачать
background image

2

FX3 Programmers Manual, Doc. # 001-64707 Rev. *C

Copyrights

Copyrights

© Cypress Semiconductor Corporation, 2011-2012. The information contained herein is subject to change without notice.
Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a
Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted
nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an
express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components
in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user.
The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such
use and in doing so indemnifies Cypress against all charges. 

Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by
and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty
provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create
derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom soft-
ware and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as speci-
fied in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source
Code except as specified above is prohibited without the express written permission of Cypress. 

Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATE-
RIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described
herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein.
Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure
may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support sys-
tems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all
charges. 

Use may be limited by and subject to the applicable Cypress software license agreement. 

All trademarks or registered trademarks referenced herein are property of the respective corporations.

Содержание EX-USB FX3

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX-USB FX3

Analog Devices Dust Networks DC9004B User Manual preview
Dust Networks DC9004B
Бренд: Analog Devices Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды