CYP SDV-CS8, Руководство по эксплуатации

Страница: 9 / 48

9
8 LAN 1(POE) Port: This port is used to connect to the SDVoE devices
to be controlled. Connect to the SDVoE units’ private network through
their dedicated network switch, to enable detection and control over
those units.
Note: If the connected network switch supports the IEEE 802.3af 2003
PoE (Power over Ethernet) standard, this unit can optionally be powered
directly via this Ethernet port.
9 FACTORY RESET Pinhole:
Press and hold for 3 seconds to reset the
unit to its factory defaults, including Ethernet settings.
Note: While the reset is in process, the LEDs on the front of the unit will
flash. Once the reset is complete, the unit will return to normal operation.
10 DC 5V Port: Plug the 5V DC power adapter into the unit and connect
it to an AC wall outlet for power. (Optional, not required if the unit is
powered via PoE).
6.3 Remote Control
1 PRESET 1~8 Buttons:
This functionality is not currently
available and will be added in the “Phase 2” update.
1