CYP SDV-CS8, Руководство по эксплуатации

Страница: 18 / 48

18
Note: If the selected audio source for an analogue output has been
set to “HDMI Audio (Stereo Downmix)” the audio output can only be
stopped from the HDMI Audio page.
4) USB Pairing:
Provides drag-and-drop control over the pairing of USB
hosts (PC, laptop, etc.) and USB devices (keyboard, mouse, webcam,
etc.) between the ports detected on all transmitters and receivers.
Note: When a USB host port has enabled “Simultaneous Mode”, it can be
paired with up to 7 device endpoints. If “Simultaneous Mode” is disabled,
a USB host port can only be paired with a single USB device endpoint.
■
USB Host: This section provides drag-and-drop buttons for
detected USB host ports as well as a button target to stop
communication from a host.
Host to Device Pairing:
To pair a USB host with a USB device,
click and drag the USB host’s button on the left to the preferred
USB device on the right side, then release the mouse button. If
the pairing was completed successfully, the active USB host’s
name will appear below the USB device’s name within the button.
Clicking on any USB host button will change the colour of itself,
and all currently paired USB device endpoints.
Note: USB devices may also be drag and dropped onto USB hosts to
activate a new pairing.