CYP SDV-CS8, Руководство по эксплуатации

Страница: 42 / 48

42
COMMAND
Description and Parameters
get uart N1 parity

Show the current parity setting of the specified serial port.
Available values for
N1
:
1 [3-pin serial port]
2 [5-pin serial port]
set uart 2 mode N1

Set the operational mode of the Control Output (5-pin) serial port.
Available values for
N1
:
0 [Disabled]
1
[RS-232 mode]
2 [RS-422 mode]
3 [RS-485 mode]
get uart 2 mode

Show the current operational mode of the Control Output (5-pin)
serial port.
set uart 2 command [N1]

Transmit the specified command data via the Control Output (5-pin)
serial port.
N1
= {Command data}
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive..