CYP SDV-CS8, Руководство по эксплуатации

Страница: 22 / 48

22
6.6.2 System Tab
This tab provides access to system configuration options including IP
configuration for both LAN ports, login and user management, and
firmware update functionality.
1) LAN 1 & LAN 2:
The IP mode for each LAN port (DHCP or Static IP),
IP address, netmask, and gateway can be set here. When a LAN port
is set to “DHCP” mode, it will automatically attempt to obtain proper
configuration information from the local DHCP server. If no DHCP
server is available, it will automatically assign itself an APIPA address
from the 169.254.xxx.xxx range. To configure the network settings
manually, please set the LAN port to “Static IP” mode and enter the
information as appropriate for the connected network. Press “Save” to
activate the changes.
Note: Both LAN ports default to "DHCP" mode. The current IP address can
be verified using the HDMI output (to be added in "Phase 2") or RS-232 if
the Device Discovery software is not available.
2) System Commands:
■
Login: Click these buttons to log into or out of the WebGUI
interface.
Note: When not logged in, only the “Monitor & Control” and “System”
tabs are available.
■
Change Password: Click this button to change the WebGUI's
administrator login password.
■ Factory Reset:
Reset the unit back to its factory default settings.