CYP SDV-CS8, Руководство по эксплуатации

Страница: 8 / 48

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER IR
IP Master Control
SDV-CS8
1 2
1 POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
2
IR Window: Accepts IR signals from the included IR remote for control
of this unit only.
6.2 Rear Panel
LAN 1(POE) LAN 2 USB HDMI OUT RS-232 CONTROL IR EXT
DC 5V
TRIGGER IN
TX RX
1 2 3 4 5 6 7 8 10 9
1 IR EXT Port:
Connect to the provided IR Extender to extend the IR
control range of the unit. Ensure that the remote being used is within
direct line-of-sight of the IR Extender.
2 CONTROL Terminal Block: Connect to a serial controllable device for
the transmission of RS-232 signals.
3 RS-232 Terminal Block: Connect to a PC, laptop or other serial control
device with a 3-pin adapter cable to control the unit via RS-232.
4 TRIGGER IN Terminal Block: This functionality is not currently
available and will be added in the “Phase 2” update.
5 HDMI OUT Port: This functionality is not currently available and will
be added in the “Phase 2” update.
6 USB Port: This functionality is not currently available and will be
added in the “Phase 2” update.
7 LAN 2 Port: Connect directly, or through a network switch, to your
PC/ laptop to control the unit via WebGUI/Telnet.