CYP SDV-CS8, Руководство по эксплуатации

Страница: 14 / 48

14
Note: If a transmitter’s streams require more bandwidth than is
available, a warning icon ( ) will be displayed instead of the normal
source icon. Video output from a source displaying this icon may
become visually unstable. It is recommended to either lower the
resolution or framerate of the stream.
Source to Single Receiver Routing: To route a source to a
receiver, click and drag the source’s button on the left to the
preferred display on the right side, then release the mouse button.
If the routing was completed successfully, the newly routed
source’s name will appear below the display’s name within the
button. Clicking on any source button will change the colour of
itself, and all currently routed displays.
Note: Receivers may also be drag and dropped onto sources to
activate a new route.
Source to Multiple Receiver Routing: To route a source to
multiple receivers at the same time, click and drag the source’s
button on the left to the “All” button on the right side, then release
the mouse button. If the routing was completed successfully, the
source’s name will appear within all appropriate buttons.
Stop Stream:
To stop the video streams from a single source, drag
the source down to the “Stop” button at the bottom of the window,
then release the mouse button. To stop ALL video streams, drag
the “All” button down to the “Stop” button.
■
Video Receiver: This section provides drag-and-drop buttons for
all receivers detected by the system as well as a button target to
stop one or all output streams from being displayed.
Stop Stream:
To stop the video stream on a single display,
drag the display down to the “Stop” button at the bottom of
the window, then release the mouse button. To stop ALL video
outputs, drag the “All” button down to the “Stop” button.