CYP SDV-CS8, Руководство по эксплуатации

Страница: 28 / 48

28
■ Hello:
Clicking on this switch will cause the selected unit to
immediately begin flashing the power LED on the front of the unit
to make it easy to find. Clicking it a second time returns the LED to
its normal behavior.
Note: The “Hello” function is not supported by all SDVoE units.
■ Icon:
Displays the icon used to represent the unit.
■
Order: Use the dropdown to reorder the units in the list. Changing
the order here will also change the order the units are listed in
other tabs.
■ Name:
Displays each unit’s current assigned name.
Note: The name can be changed within “Device Settings”.
■ IP Address:
Displays each unit’s current IP address.
■
Video Info: Clicking this button will display a pop-up window
containing detailed information about the current video output.
Note: If no display is detected the button will turn red.
■
Network Settings: Clicking this button will display a pop-up
window containing detailed information about the unit’s current
network settings, including IP mode, and allow for those settings
to be changed. To activate any changes made, please click on the
“Save” button to close the window.
■ RS-232 Settings:
Clicking this button will display a pop-up
window containing detailed information about the unit’s current
RS-232 settings, including baud rate, and allow for those settings
to be changed. To activate any changes made, please click on the
“Save” button to close the window.
■
USB Settings: Clicking this button will display a pop-up window
containing detailed information about the unit’s current USB
settings, including enabling or disabling simultaneous mode
support. To activate any changes made, please click on the “Save”
button to close the window.
Note: USB functionality is not supported by all SDVoE units.