CYP SDV-CS8, Руководство по эксплуатации

Страница: 23 / 48

23
Note: The Factory Reset does NOT clear the Tx and Rx history tables.
To completely remove old Tx and Rx units from the system, use the
“Remove” option on the Transmitter and Receiver pages.
■
S/N: Displays the unit’s serial number.
3) Firmware Upgrade:
Provides a method to remotely update the
firmware of this unit as well as to update the firmware of detected
transmitters and receivers.
Note: The update process can take several minutes to complete, especially
if there are a large number transmitters and receivers in the system. Please
do not power off any units during the update process.
■ IP Master Controller Firmware:
To update the unit's firmware
click the “Choose File” button to open the file selection window
and then select an appropriate firmware update file (*.bin format)
located on your local PC. After selecting the file, click the “Upgrade”
button to begin the firmware update process. Once the firmware
update process has completed the unit will reboot.
■
Transmitter/Receiver Firmware: To update the firmware of all
detected transmitters or receivers, click the “Choose File” button
to open the file selection window and then select an appropriate
firmware update file (*.apz format) located on your local PC. After
selecting the file, click the “Upgrade All” button to begin the
firmware update process. Once the firmware update process has
completed the unit will reboot.
Note: The transmitter/receiver firmware is stored within the IP Master
Controller after upload and will also be used when performing
individual unit updates within the Transmitter and Receiver tabs.