Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Страница: 34 / 368

Connectivity and Capacity
2 APM Installation, Configuration, and User’s Guide
Caution: On the APM hardware, Eth0 is labeled “Eth1,” and Eth1 is labeled
as “Eth2.”
Figure 1-2:
APM E2000, Back View
The AlterPath 2500 and 5000 each have a base DLS or simultaneous
connection capacity of 64. This can be upgraded to up to 512 DLS
connections for an AlterPath 2500 and up to 2048 DLS connections for an
AlterPath 5000. The APM 2500 and the APM 5000 are also available with
additional DLS connection capacity at the time of initial purchase. For details
about DLS capacity, refer to
Appendix C, “DLS Activation.”
The LCD control panel, power on/reset, and power off buttons are shown in
Figure 1-3.
Figure 1-3: APM 2500, Front View
The port connections, power switch and power connector of the APM 2500
are shown in Figure 1-4.
Expansion slots
Eth1 Eth0
USB port 2
USB port 1
AUX serial port
Reset
Console port
Fan
AC
connector
Power
switch
LCD panel
Press and hold for 1 second to power on the system.
Press and hold for 4 seconds to reset the system.
Press and hold for 10 seconds to shut down the system.