manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Поделиться
Скачать
Cyclades AlterPath Manager 2500 Скачать руководство пользователя страница 211

Consoles

Configuration and Administration

179

Figure 4-47:

 KVM Console Groups Form

2.

From the resulting form, select a group from the “Select Console Groups” 
view panel.

Note:

As with USER and DEVICE, CONSOLE is the default list which 

contains all consoles. 

3.

Select the “Add” button. 

The system transfers the selected group to the “Selected Groups” view 
panel on the right.

4.

To select another group, repeat steps 1 and 2. You can also use the 

Shift 

key to select multiple groups.

5.

Click on “Save” to complete the procedure.

T

To Delete a Console from a Group

To delete a Console from one or more groups, follow the steps below:

1.

From the menu panel, select “Consoles.” 

The system displays the Console List form.

2.

Under the Config column of the Console List form, click on the “edit” 
link of the Console you wish to remove from a group.

Содержание AlterPath Manager 2500

















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды