Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Страница: 282 / 368

Redundant (Fault Tolerant) Configuration
250 APM Installation, Configuration, and User’s Guide
Configuration of the Redundant APM
21. Log onto the WMI of the redundant APM as “admin” and select:
“System” tab > “Cluster Settings” > “Heartbeat” tab.
22. Select the “Status” drop-down box and select “Enable.”
The rest of the fields in the form will become active. The default settings
for “Fail Over Time,” “Message-Period,” and “Dead Ping Timeout” can
remain as they are.
23. Select the “Configured State” drop-down box and set it to “Redundant.”
24. Select the “Authentication” drop-down box and choose “CRC,” MD5,” or
“SHA1.”
25. Enter a password in the “Shared Secrets Key” field.
This password must be the same as when you entered it in the “Shared
Secrets Key” field for the primary APM (Step 10.).
26. Enter an IP address in the “Service IP” field.
This is an IP address for the APM web service. It must be a static address
and it must be the same IP address used when you configured the Service
IP for the primary APM (Step 11.).
27. Fill in the “Ping Nodes List” field with IP addresses to ping in order to
detect when primary APM has lost connectivity to the network. It is
recommended that this field includes the
default gateway IP address and
the router IP address. Be sure to separate the IP addresses with commas
and no spaces .
28. Enter an alias in the “Node Name” field for the redundant APM in the
column for the current system.
29. Enter the IP address for the redundant APM in the “IP Address” field in
the column for the current system.
30. Enter an alias in the “Node Name” field for the primary APM in the
column for the mated system.
31. Enter the IP address for the primary APM in the “IP Address” field in the
column for the mated system.
32. You should be able to leave the default settings as they are in the form
under the “Synchronization” tab.