Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Страница: 180 / 368

Devices
148 APM Installation, Configuration, and User’s Guide
2. Under the “Config” column of the Devices List form, click on the “Edit”
link of the device you wish to remove from a group.
3. The system displays the Device Detail form for the selected device.
4. From the Device Detail form, click on “Groups.”
The system displays the Device Group form.
5. From the “Selected Groups” view panel of the Console Group form,
select the group or groups from which you wish to remove the current
device.
6. Click on the “Delete” button.
7. Click on the “Save” button to complete the procedure.
Deleting a Device Group
You cannot delete a device group using the Device Group form. To delete a
device group, select “Groups” from the menu and refer to “Groups” on page
193 in this chapter.
T
To Upload Firmware to a Console Device
Using the Device Detail form, you can configure the AlterPath Manager to
upload firmware from its firmware repository to any ACS or TS device.
1. From the Device Detail form (Devices: Device List > Device Detail),
select the firmware you wish to upload from the Firmware/Boot drop
down list.
Note: The Firmware/Boot drop down list only appears in the Device Detail
forms of the ACS, the TS, and the KVM/net.
2. Click on the “Save” button.
3. Go back to the Device List form and select the device(s) that need to be
uploaded by clicking the corresponding checkbox, and then click
“Upload.”