Cyclades AlterPath Manager 2500 Скачать руководство пользователя страница 325

Страница: 325 / 368

Open LDAP

Advanced Configuration

293

Re-enter the password:

If the procedure was invoked from “setauth”, the following messages will
be displayed:

*** Configuration changed!

*** Execute saveconf to save the new values in flash.

*** WARNING: It may be required to restart the sshd daemon.

[root@APM_2500 root]#

Open LDAP

To Configure Open LDAP

Note:

This procedure can either be invoked through the First Time

Configuration Wizard, or from the “

setauth

” command.

Choose the “

ldap

” authentication method at the following prompt:

(local/radius//ldap/kerberos/nis/active_directory)

[local]:

ldap

Enter the name or IP address of the LDAP server at the prompt:

Enter the LDAP server:

<LDAP_server_name>

Enter the server’s LDAP base at the prompt:

(ex: 'dc=cyclades,dc=com', 'ou=person,o=cyclades'):

dc=<first_part_domain_name>,dc=<second_part_domain_name>

Note:

The second part of the domain name is usually “.com,” “.net,” “.org,”

etc.

If the procedure was invoked from “setauth”, the following messages will
be displayed:

*** Configuration changed!

*** Execute saveconf to save the new values in flash.

*** WARNING: It may be required to restart the sshd daemon.

[root@APM_2500 root]#

Содержание AlterPath Manager 2500

















































































































































































































































































































































































Результаты поиска

Содержание AlterPath Manager 2500

Отзывы:

Бренды по названию

Популярные бренды

Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Результаты поиска

Содержание AlterPath Manager 2500

Отзывы:

Бренды по названию

Популярные бренды