manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Поделиться
Скачать
Cyclades AlterPath Manager 2500 Скачать руководство пользователя страница 262

Security Rules

 

230

APM Installation, Configuration, and User’s Guide

3.

Click on the “Save” button. 

Warning:

If the domain name server is down or is not configured correctly, 
users with security rules that have host/domainname filtering with 
deny permission will still be denied access to the APM because 
the security rule can not be verified. If the rule is “Allow” the rule 
is ignored and the next “allow” rule is considered.

All successful DNS reverse lookup entries are cached for about 30 
minutes, and all unsuccessful DNS reverse lookup entries are 

Start IP

The starting IP address of a range of IP 
addresses.

End IP

The ending IP address of a range of IP 
addresses.

Hostname

Hostname of the workstation. If the 
domainname is not entered, then the 
domainname of the APM is used to filter the 
source.

Domain

Domain name on which the workstation will 
connect from. If the workstation belongs to 
subdomain and only domain filtering is 
entered, all sub domains are allowed or denied 
access based on the rule permission.

Add

Button to add to the conditions list the address, 
address range, or hostname/domainname you 
just entered in the IP or Netmask field. 

Delete

Button to delete a selected IP address, address 
range, or hostname/domainname from the 
adjacent Source IP Conditions list box.

Back

Button to return to the previous page.

Save

Button to save your configuration.

Table 4-39: 

Security Rules, Source IP

Element

Function

Содержание AlterPath Manager 2500

















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды