manualshive.com logo in svg

Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Поделиться
Скачать
Cyclades AlterPath Manager 2500 Скачать руководство пользователя страница 195

Profiles

Configuration and Administration

163

How Health Monitoring Works

Based on the aforementioned configuration settings, the program gets from 
the database a list of devices to check. The monitoring results are ultimately 
stored in a log file using the following line format for each device:

Device_Name,IP,Device_IP,Phone_Number,Date,Time, Result_Status

Each line is a syslog message generated by Health Monitoring, and contains 
the string identifier, 

HeaLth_MoNiToR

 which is used by the alarm trigger. 

Moreover, the “Result_Status” field will have two leading strings:

•

“OK” (indicates that the device is okay)

•

“NOK” (indicates a problem)

It is for this reason that the trigger expression needs to be restricted further to: 
HeaLth_MoNiToR.*NOK in order for users to get messages that only relate 
to failure, and not be bombarded by a large amount of unnecessary messages. 

User Notification

For Health Monitor notification to work properly, you must add users to the 
“Notify Users”

 

list associated with the device.

Profiles

The “Profiles” option allows you to configure the port profile for a target 
console. Port profiles define a standard set of parameters that are common to 
many consoles such as port speed, data bits, and stop bits. 

Notify

Select “Yes” if you want users to receive email 
notifications regarding the alarm.

Create Alarm

Select Yes if you want alarms to be generated 
based on the trigger expression.

Priority

Select a priority to be associated with the 
alarm.

Status

Select Enable to enable this particular alarm 
trigger.

Table 4-20: 

Alarm Trigger Setup Fields

Element

Definition

Содержание AlterPath Manager 2500

















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды