Cyclades AlterPath Manager 2500, Инструкция по установке, настройке и эксплуатации

Страница: 212 / 368

Consoles
180 APM Installation, Configuration, and User’s Guide
The system displays the Console Detail form.
1. From the Console Detail form, click on the “Groups” tab.
The system displays the Console Group form.
3. From the Selected Groups view panel of the Console Group form, select
the group or groups from which you wish to remove the current console.
4. Click on the “Delete” button.
5. Click on “Save” to complete the procedure.
Deleting a Console Group
You cannot delete a console group from the Console Group form. To delete a
console group or any group, you must select “Groups” from the Admin menu.
See “Groups” on page 193 in this chapter.
T
To Connect to a Console
To connect to a console using Secure Shell (SSH), follow the following step:
Note: This does not apply to KVM consoles.
1. From the Console List form, select the console you wish to connect to by
selecting the console name.
Configuring Outlets
The “Outlets” tab allows you to associate the outlets on an IPDU to a console
port.
On a KVM, the IPDU is connected to the KVM device’s “AUX” port, and
outlets can be individually assigned to specific KVM ports.
On an ACS or TS device, the IPDU is connected directly to the serial console
port. The outlets on the IPDU are accessed and controlled through the console
port using the IPDU’s command line interface.
Note: The IPDU is currently not supported on the OnSite through the APM.