CyberOptics AMS-150C, Руководство пользователя

Страница: 37 / 143

37
3) Check the HT1 box, and enter the upper and lower trigger values for humidity. (Do the same for the other
sensors HT2
– HT5, if your AMS is equipped with them.)
In our example, to give ourselves a little leeway and to make sure the RH values actually fall outside the range
4
– 8% before data is downloaded to a log file. As a result, we have chosen 1 rises above and 1 falls below values of
3.90 and 8.10, respectively. (We ignored the other settings, because they do not apply to our particular model of
AMS.)
7)
Click Apply to save the settings you entered.
8)
Click OK to close the dialog.