CyberOptics AMS-150C, Руководство пользователя

Страница: 99 / 143

99
Setting Go/No-Go Tolerances
To set Go/No-Go tolerances, do the following.
1)
Open MultiView and click the Humidity tab.
2)
Choose the Settings > Set Go/No-Go menu item.
MultiView populates the
Set Go/No-Go dialog with the default values (12.00 and 8.00).
3)
Enter the appropriate values in the Rise above and Fall below data-entry box. (If your AMS has additional HT
sensors, check the HT2 – HT5 boxes, if you want to set tolerances for these sensors.)
4)
Click Apply to save your entries.
5)
Click OK to close the dialog.