25
PROBLEM HANDLING
PROBLEM
POSSIBLE REASONS
THINGS TO DO
No Power
- AC cord has been loosened
- Please properly connect the AC cord
- The power switch is switched off
- Please switch the power switch on
the rear panel on.
Unable to close the disc tray
- The disc is not properly placed
- Please place in the disc again
Unable to play
- The power is not on
- Switch on the power
- No disc is placed in (the display
- Place in a disc
indicates "INSERT DISC")
- The disc is placed on the wrong
- Place in the disc again with the labe-
side
led side facing up
- Disc coded
- Change the code*
- Disc too dirty
- Wipe clean the disc surface
- Disc distorted
- Use a new disc
- The Player has condensation
- Switch off the power for 1-2 hours
No sound reproduced
- No disc is placed in
- Place in a disc
- Mistake in the audio setup
- Setup the correct audio mode
- The speed of play has been
- Press the PLAY key to return to nor-
changed
mal play
- The Audio terminal has not been
- Properly connect the cables
properly connected
- Mute condition
- Reset to mute off
No Picture
- The device has not properly been
- Check if all connections are correct
connected
- The TV is not set to DVD/Video
- Set the TV to the Audio-Video pro-
mode
gram (e. g. AV1 or AV2)
No sound reproduced from the
- There is a mistake in the audio
- Reset the audio mode to the original
5.1 channel*
setup
settings
Subtitles do not appear
- The subtitle setting has been
- Shift the subtitle setting to “Subtitle
shifted to “Subtitle Off”
On”
Remote control does not work
- Batteries have been used up
- Replace new batteries
- The front end of the remote control
- Please use the remote control cor-
did not aim at the disc player’s
rectly
remote control sensor
- No disc is placed in
- Place in a disc
When there is a problem, it does not mean malfunction. Before sending for repair, please examine your device accor-
ding to the following:
Functions marked with “*” are not available on all models.
