SETUP MENU
16
ENG
Downmix
-
Output over analogue audio output and additionally over the digital
output when set to PCM.
-
Highlight “Downmix” in the audio setup menu. Please press the
direction button to enter the menu. Move the highlight bar by
pressing the buttons or to select one of the following options:
LT/RT:
If you set to LT/RT, a mixed signal of the surround signal will
be produced on the left and right output. The left output signal con-
sists of the front left signal plus centre and the sum signal of the left
and right signal of the surround speakers. The right output signal
consists of the front right signal plus subwoofer plus the difference
signal of the left and right signal of the surround speakers.
STEREO:
If you set to STEREO, the left signal consists of the front
left signal plus surround left signal and sum signal of the centre and
subwoofer. The right signal consists of the front right signal plus sur-
round right signal and sum signal of the centre and subwoofer.
-
Please press “ENTER” to finalize your selection. You can leave this
menu by pressing the button on your remote control.
Dual Mono
-
Highlight “Dual Mono” in the audio setup menu. Please press the
direction button to enter the menu. Move the highlight bar by
pressing the buttons or to select one of the following options:
STEREO:
Sets the stereo signal.
L-MONO:
There will only be output of the left signal on the left and
right loudspeaker.
R-MONO:
There will only be output of the right signal on the left
and right loudspeaker.
MIX-MONO:
The left and right signal will be mixed and put out
mixed on the left and right loudspeaker.
-
Please press “ENTER” to finalize your selection. You can leave this
menu by pressing the button on your remote control.
Dynamic
-
In this menu you can set the Dynamic Range Control. Big volume
jumps will be reduced, if they are annoying - e. g. late in the eve-
ning.
-
Highlight “Dynamic” in the audio setup menu. Please press the
direction button to enter the menu. Move the bar by pressing the
buttons or to select the required dynamic range control. You
can set this mode to OFF, 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8 and FULL.
-
Please press the button on your remote control to leave this
menu point.
-- AUDIO SETUP PAGE --
-- AUDIO SETUP PAGE --
SPDIF OUTPUT
DOWNMIX
DUAL MONO
DYNAMIC
MAIN PAGE
SPDIF OUTPUT
DOWNMIX
DUAL MONO
DYNAMIC
MAIN PAGE
LT/RT
STEREO
STEREO
L-MONO
R-MONO
MIX-MONO
-- AUDIO SETUP PAGE --
SPDIF OUTPUT
DOWNMIX
DUAL MONO
DYNAMIC
MAIN PAGE
FULL
6/8
4/8
2/8
OFF
