P/N IM-C35KD Rev. C
2014 Commercial Wireless Systems International, LLC.
27
4.3 Initial System Configuration
After the CP-3500D is powered up and the automatic System Initialization procedure is complete the
System Requires Configuration screen will be shown.
Press the setup soft key and you will be prompted to enter a password. The default password is
3000. After entering the password press the ENTER key and the screen below will be shown.
The three menu items shown are important to verify and change if necessary before continuing to the
system main screen and performing any other programming.
We strongly recommend setting the
time and date as a minimum so the event logs will have the correct time and date from this
point forward.
If you choose not to change or set any of these items then you can press the DONE
soft key to proceed to the main CP-3500D screen. All of these items can be changed later through
the Config menu accessible from the main screen.
S y s t e m R e q u i r e s C o n f i g u r a t i o n
S e t u p
C P - 3 5 0 0 D
I n i t i a l Co n f i g u r a t i o n M e n u
D o n e
S e t T i m e a n d D a t e
P a s s w o r d S e t u p
B a s e c o d e S e t u p
S u p e r v is o r y S e t u p
Содержание CP-3500D
Страница 12: ...P N IM C35KD Rev C 2014 Commercial Wireless Systems International LLC 12 Figure 1...
Страница 21: ...P N IM C35KD Rev C 2014 Commercial Wireless Systems International LLC 21 Figure 2...
Страница 47: ...P N IM C35KD Rev C 2014 Commercial Wireless Systems International LLC 47 Figure 4...
