CWSI CP-3500D, Руководство по эксплуатации и установке

Страница: 17 / 79

P/N IM-C35KD Rev. C

2014 Commercial Wireless Systems International, LLC.
17
After the system initialization is completed the System Requires Configuration screen will be shown.
Refer to the system programming section of this manual to complete the initial configuration.
System Initialization Sample Screen
3.4.1 Enrolling Devices, Annunciators and Repeaters
Warning: All initiating devices, annunciators and repeaters must be enrolled into the CP-
3500D control panel. Initiating devices, annunciators and repeaters will not report alarms or
troubles until they are enrolled. Do not install batteries in any device or apply power to any
repeater or annunciator until the CP-3500D is in enrollment mode.
Device enrollment allows the
CP-3500D to accept signals from that device. It also programs the base code into the device and
stores the serial number into the CP-3500D memory. The main system normal screen must be
showing before the CP-3500D can be placed into enrollment mode. If any alarms or troubles are
showing on the LCD, reset the CP-3500D to gain access to the PROGRAM soft key. While the main
screen is showing, press the program soft key to display the program menu selections. If necessary,
use the UP/DOWN keys to highlight DEVICE ENROLLMENT then press the ENTER key to place the
CP-3500D in enrollment mode. The following screen will appear.
S y s t e m I n it i a l i z a t i o n
E s t im a t e d T i m e
X M i n u t e s
D e v ic e s Ch e c k e d I n
0 0 2 0 / 0 1 0 0
R e l a y s P r o g r a m m e d
0 1 0 / 0 2 5
Devices and
Relays in
system
memory
Actual
Devices
found and
Relays
programmed
D e v ic e E n r o l l m e n t
L o o k i n g F o r D e v ic e s
D e v ic e F o u n d : 0 0 0 0
P o we r u p d e v ic e t o b e e n r o l l e d