<BS height, width>
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Defi ne area for the box mode
[Format]
ASCII
<BS height, width>
[Range]
[Description]
De
fi
nes the area where position a character. If the box dimensions are bigger than the
font, then the empty spaces are
fi
lled with white spaces, whereas if the box dimensions
are smaller than the font, then the font is cutted.
[Notes]
• To disable the Box Size set height and width parameters to 0 (<BS0,0>).
[Default]
[Reference]
[Example]
<BU x1, y1, x2, y2>
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Re-read/verify printed barcode
[Format]
ASCII
<BU x1, y1, x2, Y2>
[Range]
[Description]
• Detect a barcode inside an area de
fi
ned with x1, y1, x2, y2 coordinates (in pixel),
where:
x1 -> minimum horizontal coordinate
y1 -> minimum vertical coordinate
x2 -> maximum horizontal coordinate
y2 -> maximum vertical coordinate
The command answer as follow:
<BU
x barcode
>
where
-
corresponds to CR character ($0D).
- x indicate the reading result ; the x value can be :
‘!’ : the barcode is read
‘#’: the barcode is not correctly read
-
barcode
is the barcode’s characters read
[Notes]
• Barcode = CODE39 type accepted.
• For the barcode orientation refer to the image.
• If the coordinates are reversed, the printer automatically turns the points to create in
any case the box.
• If the x2 is greater than the maximum horizontal width of graphic page, the box is drawn
using the maximum width as last point.
• If the y2 is greater than the maximum length of graphic page de
fi
ned by <LHT...> com-
mand, the box is drawn using the maximum length (de
fi
ned by this command) as last
point.
• The number of dots detected is dependent on the resolution set in
scanner.cfg
fi
le.
[Default]
[Reference]
<TB x1, y1, x2, y2>
SVELTA Emulation
Command Reference
93
Содержание KPM300
Страница 72: ...Blank page ESC POS Emulation 72 Command Reference ...
Страница 127: ......
